oztoppy Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
spinach1

Junior Member
Registered:
Posts: 6
Reply with quote  #1 
Hi All, Blindly shifted my TRF 7160 from Aus to NZ. Anywho, no channels scanned due to the bandwidth thing, I see references to transponder table edit TAP but the link is dead with the old forum. Is it still available?
0
DeltaMikeCharlie

Mostly Harmless
Registered:
Posts: 249
Reply with quote  #2 
Run the TAP once and then scan for services.

There is no need to place this TAP in the AutoStart directory, however, if you ever do a factory reset or reload firmware, you will need to run the TAP again.

Australian Topfield PVRs only receive DVB-T, not DVB-T2.  If NZ use DVB-T2 broadcasts, Topfield PVRs will not be able to receive them.

 
Attached Files
zip TransponderEdit-NZ-Full.zip (16.65 KB, 1 views)

0
spinach1

Junior Member
Registered:
Posts: 6
Reply with quote  #3 
Thanks for that but no go, Unzipped and copied via usb into program files folder, then selected and run the TAP. It reverted back to main menu with no other indications so I went to search. It still shows as 7Mhz for bandwidth there and no channels found. Did I miss something?
0
DeltaMikeCharlie

Mostly Harmless
Registered:
Posts: 249
Reply with quote  #4 
Was a log file produced?  Are there any messages in it?

Do you have FirmwareTMS.dat on your PVR?
0
spinach1

Junior Member
Registered:
Posts: 6
Reply with quote  #5 
Hi, Not able to locate a log file, System ID is 33021, Updated firmware today to 1.16.00 installed TAPtoDate on PVR and went to select and install firmwareTMS.dat from that but not seeing it anywhere. Tried via USB and the .dat file does not show up
0
spinach1

Junior Member
Registered:
Posts: 6
Reply with quote  #6 
Ooops, found it.....
0
spinach1

Junior Member
Registered:
Posts: 6
Reply with quote  #7 
OK, have installed FirmwareTMS.dat and re-run the transponderedit TAP, now searching with 8 Mhz.....
0
spinach1

Junior Member
Registered:
Posts: 6
Reply with quote  #8 
Ok, all channels now found, just the EPG is only showing now/next programs, I will see if there is a TAP to extend that. If you know of any let me know, otherwise thanks for the help.
0
DeltaMikeCharlie

Mostly Harmless
Registered:
Posts: 249
Reply with quote  #9 
Good news.  From memory, only now/next was available for other users that have applied this TAP.
0
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.